Posted on

JUN, Intake Manifold – Nissan S13 SR20DET

JUN, Intake Manifold - Nissan S13 SR20DET
JUN, Intake Manifold – Nissan S13 SR20DET
JUN, Intake Manifold - Nissan S13 SR20DET
JUN, Intake Manifold – Nissan S13 SR20DET
JUN, Intake Manifold - Nissan S13 SR20DET
JUN, Intake Manifold – Nissan S13 SR20DET

JUN, Intake Manifold – Nissan S13 SR20DET
– 80mm
– Model : 36638

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

GODSPEED, Intake Manifold – Nissan RB20DET

GODSPEED, Intake Manifold - Nissan RB20DET
GODSPEED, Intake Manifold – Nissan RB20DET
GODSPEED, Intake Manifold - Nissan RB20DET
GODSPEED, Intake Manifold – Nissan RB20DET

GODSPEED, Intake Manifold – Nissan RB20DET
– Model : 33392

*** Direct bolt on / fit stock throttle body 65MM throttle body.

-20% more flow compare to stock
-direct bolt on / fit stock throttle body
-must be use with 1/8 npt fitting for vacuum port
-perfect upgrade for RB20DET MOTOR

This intake manifold kit will improve mid to high RPM range power, even greater with higher boost and/or upgraded turbos.

The fine cast aluminum Polished intake manifold allows for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing Intake manifold is a must.

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

NN, Intake Manifold – Toyota Vios

NN, Intake Manifold - Toyota Vios
NN, Intake Manifold – Toyota Vios
NN, Intake Manifold - Toyota Vios
NN, Intake Manifold – Toyota Vios

NN, Intake Manifold – Toyota Vios
– Model : 36639

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

GODSPEED, Intake Manifold (Chrome) – Nissan S14/S15

GODSPEED, Intake Manifold (Chrome) - Nissan S14/S15
GODSPEED, Intake Manifold (Chrome) – Nissan S14/S15
GODSPEED, Intake Manifold (Chrome) - Nissan S14/S15
GODSPEED, Intake Manifold (Chrome) – Nissan S14/S15

GODSPEED, Intake Manifold (Chrome) – Nissan S14/S15
– Chrome Type
– Model : 33828

– polished aluminum casting
– hardware included
– will direct fit SR20 oem throttle body or aftermarket throttle body
– 20% more flow compare to stock
– perfect upgrade for sr20det motor

Nissan SR20DET intake manifold will improve mid to high RPM range power, even greater with higher boost and/or upgraded turbos.

The fine cast aluminum Chrome / Polished intake manifold allows for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing Intake manifold is a must.

*** Not Applicable RED top SR20
*** BLACK TOP S14 SR20DET MOTOR INTAKE MANIFOLD FOR S14 (WILL FIT S15 BLACK TOP ALSO)
*** THROTTLE BODY SCREW HOLE MEASUREMENT PLEASE REFER TO PIC ATTACHED

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

GODSPEED, Intake Manifold (Sand Blast) – Nissan S14/S15

GODSPEED, Intake Manifold (Sand Blast) - Nissan S14/S15
GODSPEED, Intake Manifold (Sand Blast) – Nissan S14/S15
GODSPEED, Intake Manifold (Sand Blast) - Nissan S14/S15
GODSPEED, Intake Manifold (Sand Blast) – Nissan S14/S15

GODSPEED, Intake Manifold (Sand Blast) – Nissan S14/S15
– Sand Type
– Model : 33827

– hardware included
– will direct fit SR20 oem throttle body or aftermarket throttle body
– 20% more flow compare to stock
– perfect upgrade for sr20det motor

Nissan SR20DET intake manifold will improve mid to high RPM range power, even greater with higher boost and/or upgraded turbos.

The fine cast aluminum Chrome / Polished intake manifold allows for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing Intake manifold is a must.

*** Not Applicable RED top SR20
*** BLACK TOP S14 SR20DET MOTOR INTAKE MANIFOLD FOR S14 (WILL FIT S15 BLACK TOP ALSO)
*** THROTTLE BODY SCREW HOLE MEASUREMENT PLEASE REFER TO PIC ATTACHED

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

GOLDEN EAGLE, Intake Manifold Gasket – Daihatsu

GOLDEN EAGLE, Intake Manifold Teflon Gasket - Daihatsu
GOLDEN EAGLE, Intake Manifold Gasket – Daihatsu
GOLDEN EAGLE, Intake Manifold Teflon Gasket - Daihatsu
GOLDEN EAGLE, Intake Manifold Gasket – Daihatsu

GOLDEN EAGLE, Intake Manifold Teflon Gasket – Daihatsu

Golden Eagle intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head.

-Thermal Shield Gaskets will reduce heat soak between your intake manifold and your
head.
-Made from virgin sheet material with high heat deflection.
-Max operating temperature 500°F/260°C

Advantages to this System are :
– Reduces Heat soak / transfer from the engine into the intake manifold where a
Manifold Divider Gasket is used
– Throttle body spacers achieve the same result where most throttle bodies utilise
hot water chokes and emission controls.
– The cooler manifold no longer heats the incoming air which allows increased
ignition timing / tuning
– This modification can be installed without visible signs and can retain factory
new vehicle warranties
– Can be cleaned and refitted multiple times
– This is considered to be an extension of any Cold Air Induction kit fitted to your
vehicle. Why pump cold air in only to be heated by the manifold.

Why do they Work :
– For every 5 Degree reduction in temperature, increases the density of the air and
therefore the power by 1%
– The cooler the air, the more dense it is with a greater proportion of oxygen
molecules.
– The more air your engine can ingest when it is cooler and denser, the more air to
be mixed with fuel providing greater thermal efficiency
– With the appropriate tuning, providing more power, fuel economy and most
importantly, more reliability.

GOLDEN EAGLE, Intake Manifold Gasket – Daihatsu
– Teflon
– Thickness : 3mm

– Daihatsu L2
– Model : 34828

– Perodua Kenari/Kelisa
– Model : 34827

– Daihatsu L5
– Model : 35008

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

GOLDEN EAGLE, Intake Manifold Gasket – Honda

Golden Eagle Thermal Intake Manifold Gasket - Honda
GOLDEN EAGLE, Intake Manifold Gasket – Honda
Golden Eagle Thermal Intake Manifold Gasket
GOLDEN EAGLE, Intake Manifold Gasket – Honda

GOLDEN EAGLE, Intake Manifold Gasket – Honda

Golden Eagle intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head.

-Thermal Shield Gaskets will reduce heat soak between your intake manifold and your
head.
-Made from virgin sheet material with high heat deflection.
-Max operating temperature 500°F/260°C

Advantages to this System are :
– Reduces Heat soak / transfer from the engine into the intake manifold where a
Manifold Divider Gasket is used
– Throttle body spacers achieve the same result where most throttle bodies utilise
hot water chokes and emission controls.
– The cooler manifold no longer heats the incoming air which allows increased
ignition timing / tuning
– This modification can be installed without visible signs and can retain factory
new vehicle warranties
– Can be cleaned and refitted multiple times
– This is considered to be an extension of any Cold Air Induction kit fitted to your
vehicle. Why pump cold air in only to be heated by the manifold.

Why do they Work :
– For every 5 Degree reduction in temperature, increases the density of the air and
therefore the power by 1%
– The cooler the air, the more dense it is with a greater proportion of oxygen
molecules.
– The more air your engine can ingest when it is cooler and denser, the more air to
be mixed with fuel providing greater thermal efficiency
– With the appropriate tuning, providing more power, fuel economy and most
importantly, more reliability.

GOLDEN EAGLE, Intake Manifold Gasket – Honda
– Material : Teflon
– Thickness : 3mm

– Honda B16A/B18C Type-R
– Model : 31802

– Honda B18C GSR
– Model : 32626

– Honda D15/D16 SOHC
– Model : 34821

– Honda H22
– Model : 34822

– Honda K20 Series
– Model : 34823

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

GOLDEN EAGLE, Intake Manifold Gasket – Mitsubishi

GOLDEN EAGLE Thermal Intake Manifold Gasket - Honda
GOLDEN EAGLE, Intake Manifold Gasket – Mitsubishi
GOLDEN EAGLE Thermal Intake Manifold Gasket
GOLDEN EAGLE, Intake Manifold Gasket – Mitsubishi/Proton

GOLDEN EAGLE, Gasket Intake Manifold – Mitsubishi/Proton

Golden Eagle intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head.

-Thermal Shield Gaskets will reduce heat soak between your intake manifold and your
head.
-Made from virgin sheet material with high heat deflection.
-Max operating temperature 500°F/260°C

Advantages to this System are :
– Reduces Heat soak / transfer from the engine into the intake manifold where a
Manifold Divider Gasket is used
– Throttle body spacers achieve the same result where most throttle bodies utilise
hot water chokes and emission controls.
– The cooler manifold no longer heats the incoming air which allows increased
ignition timing / tuning
– This modification can be installed without visible signs and can retain factory
new vehicle warranties
– Can be cleaned and refitted multiple times
– This is considered to be an extension of any Cold Air Induction kit fitted to your
vehicle. Why pump cold air in only to be heated by the manifold.

Why do they Work :
– For every 5 Degree reduction in temperature, increases the density of the air and
therefore the power by 1%
– The cooler the air, the more dense it is with a greater proportion of oxygen
molecules.
– The more air your engine can ingest when it is cooler and denser, the more air to
be mixed with fuel providing greater thermal efficiency
– With the appropriate tuning, providing more power, fuel economy and most
importantly, more reliability.

GOLDEN EAGLE, Intake Manifold Gasket – Mitsubishi
– Material : Teflon
– Thickness : 3mm

– Mitsubishi 4G15 12V
– Model : 34829

– Mitsubishi 4G63 Evo123
– Model : 31801

– Mitsubishi 4G92 SOHC
– Model : 35012

– Mitsubishi 4G93 SOHC 1.8
– Model : 35013

– Mitsubishi 4G93T GSR DOHC
– Model : 31800

– Mitsubishi Eternal Turbo
– Model : 35009

– Mitsubishi Mivec 1.6/1.8
– Model : 35011

– Mitsubishi VR4
– Model : 34831

Mitsubishi EVO4/5/6/7/8/9
– Model : 35276

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

GOLDEN EAGLE Thermal Intake Manifold Gasket – Proton

GOLDEN EAGLE Thermal Intake Manifold Gasket - Honda
GOLDEN EAGLE Thermal Intake Manifold Gasket – Proton
GOLDEN EAGLE Thermal Intake Manifold Gasket
GOLDEN EAGLE Thermal Intake Manifold Gasket – Proton

GOLDEN EAGLE, Intake Manifold Teflon Gasket

Golden Eagle intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head.

-Thermal Shield Gaskets will reduce heat soak between your intake manifold and your head.
-Made from virgin sheet material with high heat deflection.
-Max operating temperature 500°F/260°C

Advantages to this System are :
Advantages to this System are :
– Reduces Heat soak / transfer from the engine into the intake manifold where a
Manifold Divider Gasket is used
– Throttle body spacers achieve the same result where most throttle bodies utilise
hot water chokes and emission controls.
– The cooler manifold no longer heats the incoming air which allows increased
ignition timing/tuning
– This modification can be installed without visible signs and can retain factory
new vehicle warranties
– Can be cleaned and refitted multiple times
– This is considered to be an extension of any Cold Air Induction kit fitted to your
vehicle. Why pump cold air in only to be heated by the manifold.

Why do they Work :
– For every 5 Degree reduction in temperature, increases the density of the air and
therefore the power by 1%
– The cooler the air, the more dense it is with a greater proportion of oxygen
molecules.
– The more air your engine can ingest when it is cooler and denser, the more air to
be mixed with fuel providing greater thermal efficiency
– With the appropriate tuning, providing more power, fuel economy and most
importantly, more reliability

GOLDEN EAGLE, Intake Manifold Teflon Gasket – Proton
– Material : Teflon
– Thickness : 3mm

– Proton 4G15 12V
– Model : 34829

– Proton 4G92 SOHC 1.6
– Model : 35012

– Proton 4G93 SOHC 1.8
– Model : 35013

– Proton 4G93 DOHC 1.8
– Model : 35013

– Proton Campro
– Model : 34830

– Proton Perdana V6/Eternal Turbo
– Model : 35009

– Proton Waja 4g18 1.6
– Model : 35010

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc

Posted on

GOLDEN EAGLE, Intake Manifold Gasket – Nissan

GOLDEN EAGLE, Intake Manifold Teflon Gasket - Nissan
GOLDEN EAGLE, Intake Manifold Gasket – Nissan
GOLDEN EAGLE, Intake Manifold Teflon Gasket - Nissan
GOLDEN EAGLE, Intake Manifold Gasket – Nissan

GOLDEN EAGLE, Intake Manifold Teflon Gasket – Nissan

Golden Eagle intake gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head.

-Thermal Shield Gaskets will reduce heat soak between your intake manifold and your head.
-Made from virgin sheet material with high heat deflection.
-Max operating temperature 500°F/260°C

Advantages to this System are :
Advantages to this System are :
– Reduces Heat soak / transfer from the engine into the intake manifold where a
Manifold Divider Gasket is used
– Throttle body spacers achieve the same result where most throttle bodies utilise
hot water chokes and emission controls.
– The cooler manifold no longer heats the incoming air which allows increased
ignition timing/tuning
– This modification can be installed without visible signs and can retain factory
new vehicle warranties
– Can be cleaned and refitted multiple times
– This is considered to be an extension of any Cold Air Induction kit fitted to your
vehicle. Why pump cold air in only to be heated by the manifold.

Why do they Work :
– For every 5 Degree reduction in temperature, increases the density of the air and
therefore the power by 1%
– The cooler the air, the more dense it is with a greater proportion of oxygen
molecules.
– The more air your engine can ingest when it is cooler and denser, the more air to
be mixed with fuel providing greater thermal efficiency
– With the appropriate tuning, providing more power, fuel economy and most
importantly, more reliability

GOLDEN EAGLE, Intake Manifold Gasket – Nissan
– Teflon
– Thickness : 3mm

– Nissan RB20
– Model : 35007

– Nissan RB25
– Model : 35280

– Nissan RB26
– Model : 35281

– Nissan S13
– Model : 35282

– Nissan S14/S15
– Model : 35283

***
Our Whatsapp Link
– Kindly click link below to message us
# http://www.wasap.my/60102250460

Our Telegram Channel
– Kindly click link below to join our group
# https://telegram.me/performanceparts

* Self Collect @ Courier with minimal charges
* Location : Seri Kembangan

* Interested, Please PM @ Msg @ Call @ WhatsApp
Hafiz
Tel No : +6.010.225.0460
Website : performance-part.com
Email : support@performance-part.com
Facebook : http://www.fb.com/performancepartscenter
Android Appz : http://goo.gl/5c5Yu8
Twitter : @romy_ppc