*** Direct bolt on / fit stock throttle body 65MM throttle body. -20% more flow compare to stock -direct bolt on / fit stock throttle body -must be use with 1/8 npt fitting for vacuum port -perfect upgrade for RB20DET MOTOR This intake manifold kit will improve mid to high RPM range power, even greater with higher boost and/or upgraded turbos. The fine cast aluminum Polished intake manifold allows for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing Intake manifold is a must.
* note: for S13 240sx customer this must be use with a S14 240sx wheel hub. – OEM knuckle vs. Godspeed Knuckle – Leading Wheel : OEM is 38 degrees vs. Godspeed is 56 degrees – Trailing Wheel : OEM is 30 degrees vs. Godspeed is 46 degrees – Turning Sircle (curb-to-curb) : OEM is 30.1 feet vs. Godspeed is 23 feet – Lock-to-Lock : OEM is 3 turns vs. Godspeed is 2.6 turns
*** Note: For S13 240sx customers this must be use with a s14 240sx wheel hub.
GODSPEED, 6 Point Roll Cage Mitsubishi Lancer Evolution 789 (03~07) (will also fit the 02-06 Mitsubishi lancer)This will fit 2003 2004 2005 2006 2007 Mitsubishi Lancer Evolution (includes Lancer) (PROFESSIONAL INSTALLATION ONLY!!)
– 40mm seamless carbon steel , pre-bent tubing. Bolt on design with bolts & mounting plate.Colors varies (please call to check what we have in stock)NOTE: With sunroof equipped cars, removal of the headliner is required. This cage reduces body roll by 40% or more. Perfect for road racing or drifting. Our cages have been designed to be easily installed with completely bolt on pieces.
The perfect fit in your vehicle allows quick and easy entry and most importantly, quick exiting, while the cage conforms closely to your interior for a clean, unobtrusive look and feel.
All of our bars and cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for installation.
Most applications are a true bolt-in and require NO WELDING.
– hardware included
– will direct fit SR20 oem throttle body or aftermarket throttle body
– 20% more flow compare to stock
– perfect upgrade for sr20det motor
Nissan SR20DET intake manifold will improve mid to high RPM range power, even greater with higher boost and/or upgraded turbos.
The fine cast aluminum Chrome / Polished intake manifold allows for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing Intake manifold is a must.
*** Not Applicable RED top SR20
*** BLACK TOP S14 SR20DET MOTOR INTAKE MANIFOLD FOR S14 (WILL FIT S15 BLACK TOP ALSO)
*** THROTTLE BODY SCREW HOLE MEASUREMENT PLEASE REFER TO PIC ATTACHED
